18356 10:53:48 (0) ** WMIDiag v2.1 started on Jueves, 25 de Julio de 2013 at 10:51.
18357 10:53:48 (0) **
18358 10:53:48 (0) ** Copyright (c) Microsoft Corporation. All rights reserved - July 2007.
18359 10:53:48 (0) **
18360 10:53:48 (0) ** This script is not supported under any Microsoft standard support program or service.
18361 10:53:48 (0) ** The script is provided AS IS without warranty of any kind. Microsoft further disclaims all
18362 10:53:48 (0) ** implied warranties including, without limitation, any implied warranties of merchantability
18363 10:53:48 (0) ** or of fitness for a particular purpose. The entire risk arising out of the use or performance
18364 10:53:48 (0) ** of the scripts and documentation remains with you. In no event shall Microsoft, its authors,
18365 10:53:48 (0) ** or anyone else involved in the creation, production, or delivery of the script be liable for
18366 10:53:48 (0) ** any damages whatsoever (including, without limitation, damages for loss of business profits,
18367 10:53:48 (0) ** business interruption, loss of business information, or other pecuniary loss) arising out of
18368 10:53:48 (0) ** the use of or inability to use the script or documentation, even if Microsoft has been advised
18369 10:53:48 (0) ** of the possibility of such damages.
18370 10:53:48 (0) **
18371 10:53:48 (0) **
18372 10:53:48 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
18373 10:53:48 (0) ** ----------------------------------------------------- WMI REPORT: BEGIN ----------------------------------------------------------
18374 10:53:48 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
18375 10:53:48 (0) **
18376 10:53:48 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
18377 10:53:48 (0) ** Windows XP - Service pack 3 - 32-bit (2600) - User 'ADV-CPU-002\EMR' on computer 'ADV-CPU-002'.
18378 10:53:48 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
18379 10:53:48 (0) ** Environment: ........................................................................................................ OK.
18380 10:53:48 (0) ** System drive: ....................................................................................................... C: (Disco #0 Partición #0).
18381 10:53:48 (0) ** Drive type: ......................................................................................................... IDE (WDC WD1600AABS-00PRA0).
18382 10:53:48 (0) ** There are no missing WMI system files: .............................................................................. OK.
18383 10:53:48 (0) ** There are no missing WMI repository files: .......................................................................... OK.
18384 10:53:48 (0) ** WMI repository state: ............................................................................................... NOT TESTED.
18385 10:53:48 (0) ** AFTER running WMIDiag:
18386 10:53:48 (0) ** The WMI repository has a size of: ................................................................................... 24 MB.
18387 10:53:48 (0) ** - Disk free space on 'C:': .......................................................................................... 33755 MB.
18388 10:53:48 (0) ** - INDEX.BTR, 1548288 bytes, 25/07/2013 10:52:14 a.m.
18389 10:53:48 (0) ** - INDEX.MAP, 780 bytes, 25/07/2013 10:52:14 a.m.
18390 10:53:48 (0) ** - MAPPING.VER, 4 bytes, 25/07/2013 10:52:14 a.m.
18391 10:53:48 (0) ** - MAPPING1.MAP, 12272 bytes, 25/07/2013 10:22:14 a.m.
18392 10:53:48 (0) ** - MAPPING2.MAP, 12272 bytes, 25/07/2013 10:52:14 a.m.
18393 10:53:48 (0) ** - OBJECTS.DATA, 23486464 bytes, 25/07/2013 10:52:14 a.m.
18394 10:53:48 (0) ** - OBJECTS.MAP, 11492 bytes, 25/07/2013 10:52:14 a.m.
18395 10:53:48 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
18396 10:53:48 (2) !! WARNING: Windows Firewall Service: .................................................................................. STOPPED.
18397 10:53:48 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
18398 10:53:48 (0) ** DCOM Status: ........................................................................................................ OK.
18399 10:53:48 (0) ** WMI registry setup: ................................................................................................. OK.
18400 10:53:48 (0) ** INFO: WMI service has dependents: ................................................................................... 2 SERVICE(S)!
18401 10:53:48 (0) ** - Security Center (WSCSVC, StartMode='Automatic')
18402 10:53:48 (0) ** - Windows Firewall/Internet Connection Sharing (ICS) (SHAREDACCESS, StartMode='Automatic')
18403 10:53:48 (0) ** => If the WMI service is stopped, the listed service(s) will have to be stopped as well.
18404 10:53:48 (0) ** Note: If the service is marked with (*), it means that the service/application uses WMI but
18405 10:53:48 (0) ** there is no hard dependency on WMI. However, if the WMI service is stopped,
18406 10:53:48 (0) ** this can prevent the service/application to work as expected.
18407 10:53:48 (0) **
18408 10:53:48 (0) ** RPCSS service: ...................................................................................................... OK (Already started).
18409 10:53:48 (0) ** WINMGMT service: .................................................................................................... OK (Already started).
18410 10:53:48 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
18411 10:53:48 (0) ** WMI service DCOM setup: ............................................................................................. OK.
18412 10:53:48 (0) ** WMI components DCOM registrations: .................................................................................. OK.
18413 10:53:48 (0) ** WMI ProgID registrations: ........................................................................................... OK.
18414 10:53:48 (0) ** WMI provider DCOM registrations: .................................................................................... OK.
18415 10:53:48 (0) ** WMI provider CIM registrations: ..................................................................................... OK.
18416 10:53:48 (0) ** WMI provider CLSIDs: ................................................................................................ OK.
18417 10:53:48 (0) ** WMI providers EXE/DLL availability: ................................................................................. OK.
18418 10:53:48 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
18419 10:53:48 (0) ** DCOM security for 'My Computer' (Access Permissions/Edit Limits): ................................................... MODIFIED.
18420 10:53:48 (1) !! ERROR: Default trustee 'EVERYONE' has been REMOVED!
18421 10:53:48 (0) ** - REMOVED ACE:
18422 10:53:48 (0) ** ACEType: &h0
18423 10:53:48 (0) ** ACCESS_ALLOWED_ACE_TYPE
18424 10:53:48 (0) ** ACEFlags: &h0
18425 10:53:48 (0) ** ACEMask: &h7
18426 10:53:48 (0) ** DCOM_RIGHT_EXECUTE
18427 10:53:48 (0) ** DCOM_RIGHT_ACCESS_LOCAL
18428 10:53:48 (0) ** DCOM_RIGHT_ACCESS_REMOTE
18429 10:53:48 (0) **
18430 10:53:48 (0) ** => The REMOVED ACE was part of the DEFAULT setup for the trustee.
18431 10:53:48 (0) ** Removing default security will cause some operations to fail!
18432 10:53:48 (0) ** It is possible to fix this issue by editing the security descriptor and adding the ACE.
18433 10:53:48 (0) ** For DCOM objects, this can be done with 'DCOMCNFG.EXE'.
18434 10:53:48 (0) **
18435 10:53:48 (0) ** DCOM security for 'My Computer' (Launch & Activation Permissions/Edit Default): ..................................... MODIFIED.
18436 10:53:48 (1) !! ERROR: Default trustee 'BUILTIN\ADMINISTRATORS' has been REMOVED!
18437 10:53:48 (0) ** - REMOVED ACE:
18438 10:53:48 (0) ** ACEType: &h0
18439 10:53:48 (0) ** ACCESS_ALLOWED_ACE_TYPE
18440 10:53:48 (0) ** ACEFlags: &h0
18441 10:53:48 (0) ** ACEMask: &h1F
18442 10:53:48 (0) ** DCOM_RIGHT_EXECUTE
18443 10:53:48 (0) ** DCOM_RIGHT_LAUNCH_LOCAL
18444 10:53:48 (0) ** DCOM_RIGHT_LAUNCH_REMOTE
18445 10:53:48 (0) ** DCOM_RIGHT_ACTIVATE_LOCAL
18446 10:53:48 (0) ** DCOM_RIGHT_ACTIVATE_REMOTE
18447 10:53:48 (0) **
18448 10:53:48 (0) ** => The REMOVED ACE was part of the DEFAULT setup for the trustee.
18449 10:53:48 (0) ** Removing default security will cause some operations to fail!
18450 10:53:48 (0) ** It is possible to fix this issue by editing the security descriptor and adding the ACE.
18451 10:53:48 (0) ** For DCOM objects, this can be done with 'DCOMCNFG.EXE'.
18452 10:53:48 (0) **
18453 10:53:48 (0) ** DCOM security for 'My Computer' (Launch & Activation Permissions/Edit Limits): ...................................... MODIFIED.
18454 10:53:48 (1) !! ERROR: Default trustee 'BUILTIN\ADMINISTRATORS' has been REMOVED!
18455 10:53:48 (0) ** - REMOVED ACE:
18456 10:53:48 (0) ** ACEType: &h0
18457 10:53:48 (0) ** ACCESS_ALLOWED_ACE_TYPE
18458 10:53:48 (0) ** ACEFlags: &h0
18459 10:53:48 (0) ** ACEMask: &h1F
18460 10:53:48 (0) ** DCOM_RIGHT_EXECUTE
18461 10:53:48 (0) ** DCOM_RIGHT_LAUNCH_LOCAL
18462 10:53:48 (0) ** DCOM_RIGHT_LAUNCH_REMOTE
18463 10:53:48 (0) ** DCOM_RIGHT_ACTIVATE_LOCAL
18464 10:53:48 (0) ** DCOM_RIGHT_ACTIVATE_REMOTE
18465 10:53:48 (0) **
18466 10:53:48 (0) ** => The REMOVED ACE was part of the DEFAULT setup for the trustee.
18467 10:53:48 (0) ** Removing default security will cause some operations to fail!
18468 10:53:48 (0) ** It is possible to fix this issue by editing the security descriptor and adding the ACE.
18469 10:53:48 (0) ** For DCOM objects, this can be done with 'DCOMCNFG.EXE'.
18470 10:53:48 (0) **
18471 10:53:48 (0) ** DCOM security for 'My Computer' (Launch & Activation Permissions/Edit Limits): ...................................... MODIFIED.
18472 10:53:48 (1) !! ERROR: Default trustee 'EVERYONE' has been REMOVED!
18473 10:53:48 (0) ** - REMOVED ACE:
18474 10:53:48 (0) ** ACEType: &h0
18475 10:53:48 (0) ** ACCESS_ALLOWED_ACE_TYPE
18476 10:53:48 (0) ** ACEFlags: &h0
18477 10:53:48 (0) ** ACEMask: &hB
18478 10:53:48 (0) ** DCOM_RIGHT_EXECUTE
18479 10:53:48 (0) ** DCOM_RIGHT_LAUNCH_LOCAL
18480 10:53:48 (0) ** DCOM_RIGHT_ACTIVATE_LOCAL
18481 10:53:48 (0) **
18482 10:53:48 (0) ** => The REMOVED ACE was part of the DEFAULT setup for the trustee.
18483 10:53:48 (0) ** Removing default security will cause some operations to fail!
18484 10:53:48 (0) ** It is possible to fix this issue by editing the security descriptor and adding the ACE.
18485 10:53:48 (0) ** For DCOM objects, this can be done with 'DCOMCNFG.EXE'.
18486 10:53:48 (0) **
18487 10:53:48 (0) ** DCOM security for 'Windows Management Instrumentation' (Launch & Activation Permissions): ........................... MODIFIED.
18488 10:53:48 (1) !! ERROR: Default trustee 'EVERYONE' has been REMOVED!
18489 10:53:48 (0) ** - REMOVED ACE:
18490 10:53:48 (0) ** ACEType: &h0
18491 10:53:48 (0) ** ACCESS_ALLOWED_ACE_TYPE
18492 10:53:48 (0) ** ACEFlags: &h0
18493 10:53:48 (0) ** ACEMask: &h1F
18494 10:53:48 (0) ** DCOM_RIGHT_EXECUTE
18495 10:53:48 (0) ** DCOM_RIGHT_LAUNCH_LOCAL
18496 10:53:48 (0) ** DCOM_RIGHT_LAUNCH_REMOTE
18497 10:53:48 (0) ** DCOM_RIGHT_ACTIVATE_LOCAL
18498 10:53:48 (0) ** DCOM_RIGHT_ACTIVATE_REMOTE
18499 10:53:48 (0) **
18500 10:53:48 (0) ** => The REMOVED ACE was part of the DEFAULT setup for the trustee.
18501 10:53:48 (0) ** Removing default security will cause some operations to fail!
18502 10:53:48 (0) ** It is possible to fix this issue by editing the security descriptor and adding the ACE.
18503 10:53:48 (0) ** For DCOM objects, this can be done with 'DCOMCNFG.EXE'.
18504 10:53:48 (0) **
18505 10:53:48 (0) ** DCOM security for 'Microsoft WMI Provider Subsystem Host' (Launch & Activation Permissions): ........................ MODIFIED.
18506 10:53:48 (1) !! ERROR: Default trustee 'BUILTIN\ADMINISTRATORS' has been REMOVED!
18507 10:53:48 (0) ** - REMOVED ACE:
18508 10:53:48 (0) ** ACEType: &h0
18509 10:53:48 (0) ** ACCESS_ALLOWED_ACE_TYPE
18510 10:53:48 (0) ** ACEFlags: &h0
18511 10:53:48 (0) ** ACEMask: &h1F
18512 10:53:48 (0) ** DCOM_RIGHT_EXECUTE
18513 10:53:48 (0) ** DCOM_RIGHT_LAUNCH_LOCAL
18514 10:53:48 (0) ** DCOM_RIGHT_LAUNCH_REMOTE
18515 10:53:48 (0) ** DCOM_RIGHT_ACTIVATE_LOCAL
18516 10:53:48 (0) ** DCOM_RIGHT_ACTIVATE_REMOTE
18517 10:53:48 (0) **
18518 10:53:48 (0) ** => The REMOVED ACE was part of the DEFAULT setup for the trustee.
18519 10:53:48 (0) ** Removing default security will cause some operations to fail!
18520 10:53:48 (0) ** It is possible to fix this issue by editing the security descriptor and adding the ACE.
18521 10:53:48 (0) ** For DCOM objects, this can be done with 'DCOMCNFG.EXE'.
18522 10:53:48 (0) **
18523 10:53:48 (0) ** DCOM security for 'Microsoft WMI Provider Subsystem Host' (Launch & Activation Permissions): ........................ MODIFIED.
18524 10:53:48 (1) !! ERROR: Default trustee 'NT AUTHORITY\NETWORK SERVICE' has been REMOVED!
18525 10:53:48 (0) ** - REMOVED ACE:
18526 10:53:48 (0) ** ACEType: &h0
18527 10:53:48 (0) ** ACCESS_ALLOWED_ACE_TYPE
18528 10:53:48 (0) ** ACEFlags: &h0
18529 10:53:48 (0) ** ACEMask: &h1F
18530 10:53:48 (0) ** DCOM_RIGHT_EXECUTE
18531 10:53:48 (0) ** DCOM_RIGHT_LAUNCH_LOCAL
18532 10:53:48 (0) ** DCOM_RIGHT_LAUNCH_REMOTE
18533 10:53:48 (0) ** DCOM_RIGHT_ACTIVATE_LOCAL
18534 10:53:48 (0) ** DCOM_RIGHT_ACTIVATE_REMOTE
18535 10:53:48 (0) **
18536 10:53:48 (0) ** => The REMOVED ACE was part of the DEFAULT setup for the trustee.
18537 10:53:48 (0) ** Removing default security will cause some operations to fail!
18538 10:53:48 (0) ** It is possible to fix this issue by editing the security descriptor and adding the ACE.
18539 10:53:48 (0) ** For DCOM objects, this can be done with 'DCOMCNFG.EXE'.
18540 10:53:48 (0) **
18541 10:53:48 (0) ** DCOM security for 'Microsoft WMI Provider Subsystem Host' (Launch & Activation Permissions): ........................ MODIFIED.
18542 10:53:48 (1) !! ERROR: Default trustee 'NT AUTHORITY\LOCAL SERVICE' has been REMOVED!
18543 10:53:48 (0) ** - REMOVED ACE:
18544 10:53:48 (0) ** ACEType: &h0
18545 10:53:48 (0) ** ACCESS_ALLOWED_ACE_TYPE
18546 10:53:48 (0) ** ACEFlags: &h0
18547 10:53:48 (0) ** ACEMask: &h1F
18548 10:53:48 (0) ** DCOM_RIGHT_EXECUTE
18549 10:53:48 (0) ** DCOM_RIGHT_LAUNCH_LOCAL
18550 10:53:48 (0) ** DCOM_RIGHT_LAUNCH_REMOTE
18551 10:53:48 (0) ** DCOM_RIGHT_ACTIVATE_LOCAL
18552 10:53:48 (0) ** DCOM_RIGHT_ACTIVATE_REMOTE
18553 10:53:48 (0) **
18554 10:53:48 (0) ** => The REMOVED ACE was part of the DEFAULT setup for the trustee.
18555 10:53:48 (0) ** Removing default security will cause some operations to fail!
18556 10:53:48 (0) ** It is possible to fix this issue by editing the security descriptor and adding the ACE.
18557 10:53:48 (0) ** For DCOM objects, this can be done with 'DCOMCNFG.EXE'.
18558 10:53:48 (0) **
18559 10:53:48 (0) ** DCOM security for 'Microsoft WBEM UnSecured Apartment' (Launch & Activation Permissions): ........................... MODIFIED.
18560 10:53:48 (1) !! ERROR: Default trustee 'EVERYONE' has been REMOVED!
18561 10:53:48 (0) ** - REMOVED ACE:
18562 10:53:48 (0) ** ACEType: &h0
18563 10:53:48 (0) ** ACCESS_ALLOWED_ACE_TYPE
18564 10:53:48 (0) ** ACEFlags: &h0
18565 10:53:48 (0) ** ACEMask: &h1F
18566 10:53:48 (0) ** DCOM_RIGHT_EXECUTE
18567 10:53:48 (0) ** DCOM_RIGHT_LAUNCH_LOCAL
18568 10:53:48 (0) ** DCOM_RIGHT_LAUNCH_REMOTE
18569 10:53:48 (0) ** DCOM_RIGHT_ACTIVATE_LOCAL
18570 10:53:48 (0) ** DCOM_RIGHT_ACTIVATE_REMOTE
18571 10:53:48 (0) **
18572 10:53:48 (0) ** => The REMOVED ACE was part of the DEFAULT setup for the trustee.
18573 10:53:48 (0) ** Removing default security will cause some operations to fail!
18574 10:53:48 (0) ** It is possible to fix this issue by editing the security descriptor and adding the ACE.
18575 10:53:48 (0) ** For DCOM objects, this can be done with 'DCOMCNFG.EXE'.
18576 10:53:48 (0) **
18577 10:53:48 (0) **
18578 10:53:48 (0) ** DCOM security warning(s) detected: .................................................................................. 0.
18579 10:53:48 (0) ** DCOM security error(s) detected: .................................................................................... 9.
18580 10:53:48 (0) ** WMI security warning(s) detected: ................................................................................... 0.
18581 10:53:48 (0) ** WMI security error(s) detected: ..................................................................................... 0.
18582 10:53:48 (0) **
18583 10:53:48 (1) !! ERROR: Overall DCOM security status: ................................................................................ ERROR!
18584 10:53:48 (0) ** Overall WMI security status: ........................................................................................ OK.
18585 10:53:48 (0) ** - Started at 'Root' --------------------------------------------------------------------------------------------------------------
18586 10:53:48 (0) ** INFO: WMI permanent SUBSCRIPTION(S): ................................................................................ 3.
18587 10:53:48 (0) ** - ROOT/DEFAULT, MSFT_UCScenarioControl.Name="Microsoft WMI Updating Consumer Scenario Control".
18588 10:53:48 (0) ** 'SELECT * FROM __InstanceOperationEvent WHERE TargetInstance ISA 'MSFT_UCScenario''
18589 10:53:48 (0) ** - ROOT/SUBSCRIPTION, MSFT_UCScenarioControl.Name="Microsoft WMI Updating Consumer Scenario Control".
18590 10:53:48 (0) ** 'SELECT * FROM __InstanceOperationEvent WHERE TargetInstance ISA 'MSFT_UCScenario''
18591 10:53:48 (0) ** - ROOT/SUBSCRIPTION, NTEventLogEventConsumer.Name="SCM Event Log Consumer".
18592 10:53:48 (0) ** 'select * from MSFT_SCMEventLogEvent'
18593 10:53:48 (0) **
18594 10:53:48 (0) ** WMI TIMER instruction(s): ........................................................................................... NONE.
18595 10:53:48 (0) ** WMI ADAP status: .................................................................................................... OK.
18596 10:53:48 (0) ** INFO: WMI namespace(s) requiring PACKET PRIVACY: .................................................................... 1 NAMESPACE(S)!
18597 10:53:48 (0) ** - ROOT/SERVICEMODEL.
18598 10:53:48 (0) ** => When remotely connecting, the namespace(s) listed require(s) the WMI client to
18599 10:53:48 (0) ** use an encrypted connection by specifying the PACKET PRIVACY authentication level.
18600 10:53:48 (0) ** (RPC_C_AUTHN_LEVEL_PKT_PRIVACY or PktPrivacy flags)
18601 10:53:48 (0) ** i.e. 'WMIC.EXE /NODE:"ADV-CPU-002" /AUTHLEVEL:Pktprivacy /NAMESPACE:\\ROOT\SERVICEMODEL Class __SystemSecurity'
18602 10:53:48 (0) **
18603 10:53:48 (0) ** WMI MONIKER CONNECTIONS: ............................................................................................ OK.
18604 10:53:48 (0) ** WMI CONNECTIONS: .................................................................................................... OK.
18605 10:53:48 (0) ** WMI GET operations: ................................................................................................. OK.
18606 10:53:48 (0) ** WMI MOF representations: ............................................................................................ OK.
18607 10:53:48 (0) ** WMI QUALIFIER access operations: .................................................................................... OK.
18608 10:53:48 (0) ** WMI ENUMERATION operations: ......................................................................................... OK.
18609 10:53:48 (0) ** WMI EXECQUERY operations: ........................................................................................... OK.
18610 10:53:48 (0) ** WMI GET VALUE operations: ........................................................................................... OK.
18611 10:53:48 (0) ** WMI WRITE operations: ............................................................................................... NOT TESTED.
18612 10:53:48 (0) ** WMI PUT operations: ................................................................................................. NOT TESTED.
18613 10:53:48 (0) ** WMI DELETE operations: .............................................................................................. NOT TESTED.
18614 10:53:48 (0) ** WMI static instances retrieved: ..................................................................................... 730.
18615 10:53:48 (0) ** WMI dynamic instances retrieved: .................................................................................... 0.
18616 10:53:48 (0) ** WMI instance request cancellations (to limit performance impact): ................................................... 0.
18617 10:53:48 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
18618 10:53:48 (0) ** # of Event Log events BEFORE WMIDiag execution since the last 20 day(s):
18619 10:53:48 (0) ** DCOM: ............................................................................................................. 0.
18620 10:53:48 (0) ** WINMGMT: .......................................................................................................... 21.
18621 10:53:48 (0) ** WMIADAPTER: ....................................................................................................... 0.
18622 10:53:48 (0) ** => Verify the WMIDiag LOG at line #17820 for more details.
18623 10:53:48 (0) **
18624 10:53:48 (0) ** # of additional Event Log events AFTER WMIDiag execution:
18625 10:53:48 (0) ** DCOM: ............................................................................................................. 0.
18626 10:53:48 (0) ** WINMGMT: .......................................................................................................... 0.
18627 10:53:48 (0) ** WMIADAPTER: ....................................................................................................... 0.
18628 10:53:48 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
18629 10:53:48 (0) ** WMI Registry key setup: ............................................................................................. OK.
18630 10:53:48 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
18631 10:53:48 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
18632 10:53:48 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
18633 10:53:48 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
18634 10:53:48 (0) **
18635 10:53:48 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
18636 10:53:48 (0) ** ------------------------------------------------------ WMI REPORT: END -----------------------------------------------------------
18637 10:53:48 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
18638 10:53:48 (0) **
18639 10:53:48 (0) ** ERROR: WMIDiag detected issues that could prevent WMI to work properly!. Check 'C:\DOCUMENTS AND SETTINGS\EMR\CONFIGURACIÓN LOCAL\TEMP\WMIDIAG-V2.1_XP___.CLI.SP3.32_ADV-CPU-002_2013.07.25_10.51.21.LOG' for details.
18640 10:53:48 (0) **
18641 10:53:48 (0) ** WMIDiag v2.1 ended on Jueves, 25 de Julio de 2013 at 10:53 (W:62 E:11 S:1).
18357 10:53:48 (0) **
18358 10:53:48 (0) ** Copyright (c) Microsoft Corporation. All rights reserved - July 2007.
18359 10:53:48 (0) **
18360 10:53:48 (0) ** This script is not supported under any Microsoft standard support program or service.
18361 10:53:48 (0) ** The script is provided AS IS without warranty of any kind. Microsoft further disclaims all
18362 10:53:48 (0) ** implied warranties including, without limitation, any implied warranties of merchantability
18363 10:53:48 (0) ** or of fitness for a particular purpose. The entire risk arising out of the use or performance
18364 10:53:48 (0) ** of the scripts and documentation remains with you. In no event shall Microsoft, its authors,
18365 10:53:48 (0) ** or anyone else involved in the creation, production, or delivery of the script be liable for
18366 10:53:48 (0) ** any damages whatsoever (including, without limitation, damages for loss of business profits,
18367 10:53:48 (0) ** business interruption, loss of business information, or other pecuniary loss) arising out of
18368 10:53:48 (0) ** the use of or inability to use the script or documentation, even if Microsoft has been advised
18369 10:53:48 (0) ** of the possibility of such damages.
18370 10:53:48 (0) **
18371 10:53:48 (0) **
18372 10:53:48 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
18373 10:53:48 (0) ** ----------------------------------------------------- WMI REPORT: BEGIN ----------------------------------------------------------
18374 10:53:48 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
18375 10:53:48 (0) **
18376 10:53:48 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
18377 10:53:48 (0) ** Windows XP - Service pack 3 - 32-bit (2600) - User 'ADV-CPU-002\EMR' on computer 'ADV-CPU-002'.
18378 10:53:48 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
18379 10:53:48 (0) ** Environment: ........................................................................................................ OK.
18380 10:53:48 (0) ** System drive: ....................................................................................................... C: (Disco #0 Partición #0).
18381 10:53:48 (0) ** Drive type: ......................................................................................................... IDE (WDC WD1600AABS-00PRA0).
18382 10:53:48 (0) ** There are no missing WMI system files: .............................................................................. OK.
18383 10:53:48 (0) ** There are no missing WMI repository files: .......................................................................... OK.
18384 10:53:48 (0) ** WMI repository state: ............................................................................................... NOT TESTED.
18385 10:53:48 (0) ** AFTER running WMIDiag:
18386 10:53:48 (0) ** The WMI repository has a size of: ................................................................................... 24 MB.
18387 10:53:48 (0) ** - Disk free space on 'C:': .......................................................................................... 33755 MB.
18388 10:53:48 (0) ** - INDEX.BTR, 1548288 bytes, 25/07/2013 10:52:14 a.m.
18389 10:53:48 (0) ** - INDEX.MAP, 780 bytes, 25/07/2013 10:52:14 a.m.
18390 10:53:48 (0) ** - MAPPING.VER, 4 bytes, 25/07/2013 10:52:14 a.m.
18391 10:53:48 (0) ** - MAPPING1.MAP, 12272 bytes, 25/07/2013 10:22:14 a.m.
18392 10:53:48 (0) ** - MAPPING2.MAP, 12272 bytes, 25/07/2013 10:52:14 a.m.
18393 10:53:48 (0) ** - OBJECTS.DATA, 23486464 bytes, 25/07/2013 10:52:14 a.m.
18394 10:53:48 (0) ** - OBJECTS.MAP, 11492 bytes, 25/07/2013 10:52:14 a.m.
18395 10:53:48 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
18396 10:53:48 (2) !! WARNING: Windows Firewall Service: .................................................................................. STOPPED.
18397 10:53:48 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
18398 10:53:48 (0) ** DCOM Status: ........................................................................................................ OK.
18399 10:53:48 (0) ** WMI registry setup: ................................................................................................. OK.
18400 10:53:48 (0) ** INFO: WMI service has dependents: ................................................................................... 2 SERVICE(S)!
18401 10:53:48 (0) ** - Security Center (WSCSVC, StartMode='Automatic')
18402 10:53:48 (0) ** - Windows Firewall/Internet Connection Sharing (ICS) (SHAREDACCESS, StartMode='Automatic')
18403 10:53:48 (0) ** => If the WMI service is stopped, the listed service(s) will have to be stopped as well.
18404 10:53:48 (0) ** Note: If the service is marked with (*), it means that the service/application uses WMI but
18405 10:53:48 (0) ** there is no hard dependency on WMI. However, if the WMI service is stopped,
18406 10:53:48 (0) ** this can prevent the service/application to work as expected.
18407 10:53:48 (0) **
18408 10:53:48 (0) ** RPCSS service: ...................................................................................................... OK (Already started).
18409 10:53:48 (0) ** WINMGMT service: .................................................................................................... OK (Already started).
18410 10:53:48 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
18411 10:53:48 (0) ** WMI service DCOM setup: ............................................................................................. OK.
18412 10:53:48 (0) ** WMI components DCOM registrations: .................................................................................. OK.
18413 10:53:48 (0) ** WMI ProgID registrations: ........................................................................................... OK.
18414 10:53:48 (0) ** WMI provider DCOM registrations: .................................................................................... OK.
18415 10:53:48 (0) ** WMI provider CIM registrations: ..................................................................................... OK.
18416 10:53:48 (0) ** WMI provider CLSIDs: ................................................................................................ OK.
18417 10:53:48 (0) ** WMI providers EXE/DLL availability: ................................................................................. OK.
18418 10:53:48 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
18419 10:53:48 (0) ** DCOM security for 'My Computer' (Access Permissions/Edit Limits): ................................................... MODIFIED.
18420 10:53:48 (1) !! ERROR: Default trustee 'EVERYONE' has been REMOVED!
18421 10:53:48 (0) ** - REMOVED ACE:
18422 10:53:48 (0) ** ACEType: &h0
18423 10:53:48 (0) ** ACCESS_ALLOWED_ACE_TYPE
18424 10:53:48 (0) ** ACEFlags: &h0
18425 10:53:48 (0) ** ACEMask: &h7
18426 10:53:48 (0) ** DCOM_RIGHT_EXECUTE
18427 10:53:48 (0) ** DCOM_RIGHT_ACCESS_LOCAL
18428 10:53:48 (0) ** DCOM_RIGHT_ACCESS_REMOTE
18429 10:53:48 (0) **
18430 10:53:48 (0) ** => The REMOVED ACE was part of the DEFAULT setup for the trustee.
18431 10:53:48 (0) ** Removing default security will cause some operations to fail!
18432 10:53:48 (0) ** It is possible to fix this issue by editing the security descriptor and adding the ACE.
18433 10:53:48 (0) ** For DCOM objects, this can be done with 'DCOMCNFG.EXE'.
18434 10:53:48 (0) **
18435 10:53:48 (0) ** DCOM security for 'My Computer' (Launch & Activation Permissions/Edit Default): ..................................... MODIFIED.
18436 10:53:48 (1) !! ERROR: Default trustee 'BUILTIN\ADMINISTRATORS' has been REMOVED!
18437 10:53:48 (0) ** - REMOVED ACE:
18438 10:53:48 (0) ** ACEType: &h0
18439 10:53:48 (0) ** ACCESS_ALLOWED_ACE_TYPE
18440 10:53:48 (0) ** ACEFlags: &h0
18441 10:53:48 (0) ** ACEMask: &h1F
18442 10:53:48 (0) ** DCOM_RIGHT_EXECUTE
18443 10:53:48 (0) ** DCOM_RIGHT_LAUNCH_LOCAL
18444 10:53:48 (0) ** DCOM_RIGHT_LAUNCH_REMOTE
18445 10:53:48 (0) ** DCOM_RIGHT_ACTIVATE_LOCAL
18446 10:53:48 (0) ** DCOM_RIGHT_ACTIVATE_REMOTE
18447 10:53:48 (0) **
18448 10:53:48 (0) ** => The REMOVED ACE was part of the DEFAULT setup for the trustee.
18449 10:53:48 (0) ** Removing default security will cause some operations to fail!
18450 10:53:48 (0) ** It is possible to fix this issue by editing the security descriptor and adding the ACE.
18451 10:53:48 (0) ** For DCOM objects, this can be done with 'DCOMCNFG.EXE'.
18452 10:53:48 (0) **
18453 10:53:48 (0) ** DCOM security for 'My Computer' (Launch & Activation Permissions/Edit Limits): ...................................... MODIFIED.
18454 10:53:48 (1) !! ERROR: Default trustee 'BUILTIN\ADMINISTRATORS' has been REMOVED!
18455 10:53:48 (0) ** - REMOVED ACE:
18456 10:53:48 (0) ** ACEType: &h0
18457 10:53:48 (0) ** ACCESS_ALLOWED_ACE_TYPE
18458 10:53:48 (0) ** ACEFlags: &h0
18459 10:53:48 (0) ** ACEMask: &h1F
18460 10:53:48 (0) ** DCOM_RIGHT_EXECUTE
18461 10:53:48 (0) ** DCOM_RIGHT_LAUNCH_LOCAL
18462 10:53:48 (0) ** DCOM_RIGHT_LAUNCH_REMOTE
18463 10:53:48 (0) ** DCOM_RIGHT_ACTIVATE_LOCAL
18464 10:53:48 (0) ** DCOM_RIGHT_ACTIVATE_REMOTE
18465 10:53:48 (0) **
18466 10:53:48 (0) ** => The REMOVED ACE was part of the DEFAULT setup for the trustee.
18467 10:53:48 (0) ** Removing default security will cause some operations to fail!
18468 10:53:48 (0) ** It is possible to fix this issue by editing the security descriptor and adding the ACE.
18469 10:53:48 (0) ** For DCOM objects, this can be done with 'DCOMCNFG.EXE'.
18470 10:53:48 (0) **
18471 10:53:48 (0) ** DCOM security for 'My Computer' (Launch & Activation Permissions/Edit Limits): ...................................... MODIFIED.
18472 10:53:48 (1) !! ERROR: Default trustee 'EVERYONE' has been REMOVED!
18473 10:53:48 (0) ** - REMOVED ACE:
18474 10:53:48 (0) ** ACEType: &h0
18475 10:53:48 (0) ** ACCESS_ALLOWED_ACE_TYPE
18476 10:53:48 (0) ** ACEFlags: &h0
18477 10:53:48 (0) ** ACEMask: &hB
18478 10:53:48 (0) ** DCOM_RIGHT_EXECUTE
18479 10:53:48 (0) ** DCOM_RIGHT_LAUNCH_LOCAL
18480 10:53:48 (0) ** DCOM_RIGHT_ACTIVATE_LOCAL
18481 10:53:48 (0) **
18482 10:53:48 (0) ** => The REMOVED ACE was part of the DEFAULT setup for the trustee.
18483 10:53:48 (0) ** Removing default security will cause some operations to fail!
18484 10:53:48 (0) ** It is possible to fix this issue by editing the security descriptor and adding the ACE.
18485 10:53:48 (0) ** For DCOM objects, this can be done with 'DCOMCNFG.EXE'.
18486 10:53:48 (0) **
18487 10:53:48 (0) ** DCOM security for 'Windows Management Instrumentation' (Launch & Activation Permissions): ........................... MODIFIED.
18488 10:53:48 (1) !! ERROR: Default trustee 'EVERYONE' has been REMOVED!
18489 10:53:48 (0) ** - REMOVED ACE:
18490 10:53:48 (0) ** ACEType: &h0
18491 10:53:48 (0) ** ACCESS_ALLOWED_ACE_TYPE
18492 10:53:48 (0) ** ACEFlags: &h0
18493 10:53:48 (0) ** ACEMask: &h1F
18494 10:53:48 (0) ** DCOM_RIGHT_EXECUTE
18495 10:53:48 (0) ** DCOM_RIGHT_LAUNCH_LOCAL
18496 10:53:48 (0) ** DCOM_RIGHT_LAUNCH_REMOTE
18497 10:53:48 (0) ** DCOM_RIGHT_ACTIVATE_LOCAL
18498 10:53:48 (0) ** DCOM_RIGHT_ACTIVATE_REMOTE
18499 10:53:48 (0) **
18500 10:53:48 (0) ** => The REMOVED ACE was part of the DEFAULT setup for the trustee.
18501 10:53:48 (0) ** Removing default security will cause some operations to fail!
18502 10:53:48 (0) ** It is possible to fix this issue by editing the security descriptor and adding the ACE.
18503 10:53:48 (0) ** For DCOM objects, this can be done with 'DCOMCNFG.EXE'.
18504 10:53:48 (0) **
18505 10:53:48 (0) ** DCOM security for 'Microsoft WMI Provider Subsystem Host' (Launch & Activation Permissions): ........................ MODIFIED.
18506 10:53:48 (1) !! ERROR: Default trustee 'BUILTIN\ADMINISTRATORS' has been REMOVED!
18507 10:53:48 (0) ** - REMOVED ACE:
18508 10:53:48 (0) ** ACEType: &h0
18509 10:53:48 (0) ** ACCESS_ALLOWED_ACE_TYPE
18510 10:53:48 (0) ** ACEFlags: &h0
18511 10:53:48 (0) ** ACEMask: &h1F
18512 10:53:48 (0) ** DCOM_RIGHT_EXECUTE
18513 10:53:48 (0) ** DCOM_RIGHT_LAUNCH_LOCAL
18514 10:53:48 (0) ** DCOM_RIGHT_LAUNCH_REMOTE
18515 10:53:48 (0) ** DCOM_RIGHT_ACTIVATE_LOCAL
18516 10:53:48 (0) ** DCOM_RIGHT_ACTIVATE_REMOTE
18517 10:53:48 (0) **
18518 10:53:48 (0) ** => The REMOVED ACE was part of the DEFAULT setup for the trustee.
18519 10:53:48 (0) ** Removing default security will cause some operations to fail!
18520 10:53:48 (0) ** It is possible to fix this issue by editing the security descriptor and adding the ACE.
18521 10:53:48 (0) ** For DCOM objects, this can be done with 'DCOMCNFG.EXE'.
18522 10:53:48 (0) **
18523 10:53:48 (0) ** DCOM security for 'Microsoft WMI Provider Subsystem Host' (Launch & Activation Permissions): ........................ MODIFIED.
18524 10:53:48 (1) !! ERROR: Default trustee 'NT AUTHORITY\NETWORK SERVICE' has been REMOVED!
18525 10:53:48 (0) ** - REMOVED ACE:
18526 10:53:48 (0) ** ACEType: &h0
18527 10:53:48 (0) ** ACCESS_ALLOWED_ACE_TYPE
18528 10:53:48 (0) ** ACEFlags: &h0
18529 10:53:48 (0) ** ACEMask: &h1F
18530 10:53:48 (0) ** DCOM_RIGHT_EXECUTE
18531 10:53:48 (0) ** DCOM_RIGHT_LAUNCH_LOCAL
18532 10:53:48 (0) ** DCOM_RIGHT_LAUNCH_REMOTE
18533 10:53:48 (0) ** DCOM_RIGHT_ACTIVATE_LOCAL
18534 10:53:48 (0) ** DCOM_RIGHT_ACTIVATE_REMOTE
18535 10:53:48 (0) **
18536 10:53:48 (0) ** => The REMOVED ACE was part of the DEFAULT setup for the trustee.
18537 10:53:48 (0) ** Removing default security will cause some operations to fail!
18538 10:53:48 (0) ** It is possible to fix this issue by editing the security descriptor and adding the ACE.
18539 10:53:48 (0) ** For DCOM objects, this can be done with 'DCOMCNFG.EXE'.
18540 10:53:48 (0) **
18541 10:53:48 (0) ** DCOM security for 'Microsoft WMI Provider Subsystem Host' (Launch & Activation Permissions): ........................ MODIFIED.
18542 10:53:48 (1) !! ERROR: Default trustee 'NT AUTHORITY\LOCAL SERVICE' has been REMOVED!
18543 10:53:48 (0) ** - REMOVED ACE:
18544 10:53:48 (0) ** ACEType: &h0
18545 10:53:48 (0) ** ACCESS_ALLOWED_ACE_TYPE
18546 10:53:48 (0) ** ACEFlags: &h0
18547 10:53:48 (0) ** ACEMask: &h1F
18548 10:53:48 (0) ** DCOM_RIGHT_EXECUTE
18549 10:53:48 (0) ** DCOM_RIGHT_LAUNCH_LOCAL
18550 10:53:48 (0) ** DCOM_RIGHT_LAUNCH_REMOTE
18551 10:53:48 (0) ** DCOM_RIGHT_ACTIVATE_LOCAL
18552 10:53:48 (0) ** DCOM_RIGHT_ACTIVATE_REMOTE
18553 10:53:48 (0) **
18554 10:53:48 (0) ** => The REMOVED ACE was part of the DEFAULT setup for the trustee.
18555 10:53:48 (0) ** Removing default security will cause some operations to fail!
18556 10:53:48 (0) ** It is possible to fix this issue by editing the security descriptor and adding the ACE.
18557 10:53:48 (0) ** For DCOM objects, this can be done with 'DCOMCNFG.EXE'.
18558 10:53:48 (0) **
18559 10:53:48 (0) ** DCOM security for 'Microsoft WBEM UnSecured Apartment' (Launch & Activation Permissions): ........................... MODIFIED.
18560 10:53:48 (1) !! ERROR: Default trustee 'EVERYONE' has been REMOVED!
18561 10:53:48 (0) ** - REMOVED ACE:
18562 10:53:48 (0) ** ACEType: &h0
18563 10:53:48 (0) ** ACCESS_ALLOWED_ACE_TYPE
18564 10:53:48 (0) ** ACEFlags: &h0
18565 10:53:48 (0) ** ACEMask: &h1F
18566 10:53:48 (0) ** DCOM_RIGHT_EXECUTE
18567 10:53:48 (0) ** DCOM_RIGHT_LAUNCH_LOCAL
18568 10:53:48 (0) ** DCOM_RIGHT_LAUNCH_REMOTE
18569 10:53:48 (0) ** DCOM_RIGHT_ACTIVATE_LOCAL
18570 10:53:48 (0) ** DCOM_RIGHT_ACTIVATE_REMOTE
18571 10:53:48 (0) **
18572 10:53:48 (0) ** => The REMOVED ACE was part of the DEFAULT setup for the trustee.
18573 10:53:48 (0) ** Removing default security will cause some operations to fail!
18574 10:53:48 (0) ** It is possible to fix this issue by editing the security descriptor and adding the ACE.
18575 10:53:48 (0) ** For DCOM objects, this can be done with 'DCOMCNFG.EXE'.
18576 10:53:48 (0) **
18577 10:53:48 (0) **
18578 10:53:48 (0) ** DCOM security warning(s) detected: .................................................................................. 0.
18579 10:53:48 (0) ** DCOM security error(s) detected: .................................................................................... 9.
18580 10:53:48 (0) ** WMI security warning(s) detected: ................................................................................... 0.
18581 10:53:48 (0) ** WMI security error(s) detected: ..................................................................................... 0.
18582 10:53:48 (0) **
18583 10:53:48 (1) !! ERROR: Overall DCOM security status: ................................................................................ ERROR!
18584 10:53:48 (0) ** Overall WMI security status: ........................................................................................ OK.
18585 10:53:48 (0) ** - Started at 'Root' --------------------------------------------------------------------------------------------------------------
18586 10:53:48 (0) ** INFO: WMI permanent SUBSCRIPTION(S): ................................................................................ 3.
18587 10:53:48 (0) ** - ROOT/DEFAULT, MSFT_UCScenarioControl.Name="Microsoft WMI Updating Consumer Scenario Control".
18588 10:53:48 (0) ** 'SELECT * FROM __InstanceOperationEvent WHERE TargetInstance ISA 'MSFT_UCScenario''
18589 10:53:48 (0) ** - ROOT/SUBSCRIPTION, MSFT_UCScenarioControl.Name="Microsoft WMI Updating Consumer Scenario Control".
18590 10:53:48 (0) ** 'SELECT * FROM __InstanceOperationEvent WHERE TargetInstance ISA 'MSFT_UCScenario''
18591 10:53:48 (0) ** - ROOT/SUBSCRIPTION, NTEventLogEventConsumer.Name="SCM Event Log Consumer".
18592 10:53:48 (0) ** 'select * from MSFT_SCMEventLogEvent'
18593 10:53:48 (0) **
18594 10:53:48 (0) ** WMI TIMER instruction(s): ........................................................................................... NONE.
18595 10:53:48 (0) ** WMI ADAP status: .................................................................................................... OK.
18596 10:53:48 (0) ** INFO: WMI namespace(s) requiring PACKET PRIVACY: .................................................................... 1 NAMESPACE(S)!
18597 10:53:48 (0) ** - ROOT/SERVICEMODEL.
18598 10:53:48 (0) ** => When remotely connecting, the namespace(s) listed require(s) the WMI client to
18599 10:53:48 (0) ** use an encrypted connection by specifying the PACKET PRIVACY authentication level.
18600 10:53:48 (0) ** (RPC_C_AUTHN_LEVEL_PKT_PRIVACY or PktPrivacy flags)
18601 10:53:48 (0) ** i.e. 'WMIC.EXE /NODE:"ADV-CPU-002" /AUTHLEVEL:Pktprivacy /NAMESPACE:\\ROOT\SERVICEMODEL Class __SystemSecurity'
18602 10:53:48 (0) **
18603 10:53:48 (0) ** WMI MONIKER CONNECTIONS: ............................................................................................ OK.
18604 10:53:48 (0) ** WMI CONNECTIONS: .................................................................................................... OK.
18605 10:53:48 (0) ** WMI GET operations: ................................................................................................. OK.
18606 10:53:48 (0) ** WMI MOF representations: ............................................................................................ OK.
18607 10:53:48 (0) ** WMI QUALIFIER access operations: .................................................................................... OK.
18608 10:53:48 (0) ** WMI ENUMERATION operations: ......................................................................................... OK.
18609 10:53:48 (0) ** WMI EXECQUERY operations: ........................................................................................... OK.
18610 10:53:48 (0) ** WMI GET VALUE operations: ........................................................................................... OK.
18611 10:53:48 (0) ** WMI WRITE operations: ............................................................................................... NOT TESTED.
18612 10:53:48 (0) ** WMI PUT operations: ................................................................................................. NOT TESTED.
18613 10:53:48 (0) ** WMI DELETE operations: .............................................................................................. NOT TESTED.
18614 10:53:48 (0) ** WMI static instances retrieved: ..................................................................................... 730.
18615 10:53:48 (0) ** WMI dynamic instances retrieved: .................................................................................... 0.
18616 10:53:48 (0) ** WMI instance request cancellations (to limit performance impact): ................................................... 0.
18617 10:53:48 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
18618 10:53:48 (0) ** # of Event Log events BEFORE WMIDiag execution since the last 20 day(s):
18619 10:53:48 (0) ** DCOM: ............................................................................................................. 0.
18620 10:53:48 (0) ** WINMGMT: .......................................................................................................... 21.
18621 10:53:48 (0) ** WMIADAPTER: ....................................................................................................... 0.
18622 10:53:48 (0) ** => Verify the WMIDiag LOG at line #17820 for more details.
18623 10:53:48 (0) **
18624 10:53:48 (0) ** # of additional Event Log events AFTER WMIDiag execution:
18625 10:53:48 (0) ** DCOM: ............................................................................................................. 0.
18626 10:53:48 (0) ** WINMGMT: .......................................................................................................... 0.
18627 10:53:48 (0) ** WMIADAPTER: ....................................................................................................... 0.
18628 10:53:48 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
18629 10:53:48 (0) ** WMI Registry key setup: ............................................................................................. OK.
18630 10:53:48 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
18631 10:53:48 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
18632 10:53:48 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
18633 10:53:48 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
18634 10:53:48 (0) **
18635 10:53:48 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
18636 10:53:48 (0) ** ------------------------------------------------------ WMI REPORT: END -----------------------------------------------------------
18637 10:53:48 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
18638 10:53:48 (0) **
18639 10:53:48 (0) ** ERROR: WMIDiag detected issues that could prevent WMI to work properly!. Check 'C:\DOCUMENTS AND SETTINGS\EMR\CONFIGURACIÓN LOCAL\TEMP\WMIDIAG-V2.1_XP___.CLI.SP3.32_ADV-CPU-002_2013.07.25_10.51.21.LOG' for details.
18640 10:53:48 (0) **
18641 10:53:48 (0) ** WMIDiag v2.1 ended on Jueves, 25 de Julio de 2013 at 10:53 (W:62 E:11 S:1).